Skip to content
CSL Industrielle Messtechnik
DE|EN
+41 55 511 50 85 Request a quote →
Self-test · ISO GPS
How confident are you with ISO GPS?

Twelve questions, about ten minutes, and you see the result right away. The self-check shows in which of the eight competence areas you are confident and where a second look pays off. It is free and compares you with no one.

Start the self-check
Short test for self-assessment, not a proof of competence. English or German: you choose the language before you start.
Question 12 · interactive
Question 12 of the GPS self-check: drawing of a base with a pin, open selection menu for the symbol field in the tolerance indicator
At the end, you draw yourself. You read what the part must do, complete the size, fill in the tolerance indicator and place the datum. Just like in our training.
Skip to content
DE|EN
+41 55 511 50 85 Request a quote →
Self-test · ISO GPS

How confident are you with ISO GPS?

Twelve questions, about ten minutes, and you see the result right away. The self-check shows in which of the eight competence areas you are confident and where a second look pays off. It is free and compares you with no one.

Start the self-check
Short test for self-assessment, not a proof of competence. English or German: you choose the language before you start.
Question 12 · interactive
Question 12 of the GPS self-check: drawing of a base with a pin, open selection menu for the symbol field in the tolerance indicator
At the end, you draw yourself. You read what the part must do, complete the size, fill in the tolerance indicator and place the datum. Just like in our training.
Loading the self-check …
What the self-check covers

The eight competence areas

The questions come from our ISO GPS basic training.

Fundamental principles
ISO 8015
Which rules apply when nothing else is indicated on the drawing, for example the independency principle.
Sizes
ISO 14405-1
What a size such as Ø20 ±0.05 actually requires and how modifiers change the evaluation.
Datums and datum systems
ISO 5459
How datums are established from real surfaces and why their order in the tolerance indicator matters.
Geometrical tolerancing
ISO 1101
How to read tolerance indicators, tolerance zones and their modifiers.
Material requirements
ISO 2692
When size and geometry are coupled by the maximum or least material requirement.
Element groups
ISO 5458
How several holes are toleranced together and what SZ and CZ do.
General tolerances
ISO 22081, ISO 2768
What applies where no tolerance value is given on the drawing.
From symbol to measurement report
ISO 8015, ISO 14253-1
How an indication on the drawing becomes a measurement, an evaluation and a conformity decision.
Receive articles like this directly
About once a month we send new practical cases, measurement data and working aids from industrial metrology. The newsletter is in German.
Subscribe to the CSL Newsletter